Sunday 18 April, 2021 |
new arrival durable stainless steel toilet paper holder brushed
by hardware-online-stores.com
Price:114.9540
Type:
Paper Holders
Brand Name:
Aothpher
Model Number:
F1006
Material:
Stainless Steel
material:
stainless steel
is customized:
yes
Instructions & Installations
1.Tools Needed Electric drill 6mm (or other sizes depending on the screw being used) diamond aiguille, cross"+" and flat"-" screw drivers, a pencil,and an eye-guard face shield. 2.Preparation The screws and anchors supped should only be apped to a sod wall, in case it is a hollow wall, please select and buy your own fittings apply. 3.Selection or installation location (1)Select a suitable place on a sod wall (2)Always make sure there is no pipe or wire in the wall. WARNING: DRILLING INTO PIPE OR WIRE IN THE WALL CAN CAUSE SERIOUS DAMAGE TO YOUR BODY OR PROPERTIES (3)Drill holes at clearance between tiles, wherever possible. (4)If the user decide to drill into surface instead, please do it with a proper aiguille and set the anchor in the back of tile to avoid tile break, it will be the user's owm risk to drill into the tile surface. 4.Installation(for sod wall only) (1)Wear eye-guard or face shield. (2)Mark the position to be drilled with a pencil. (3)Select and lock suitable aiguille to the electric drill. (4)Drill a hole at the position marked in procedure 2 (5)Put the anchor to the holes. (6)Screw in bracket with a suitable screw driver. 5.Cleaning Only clean and dry the surface with mild-cleaner and soft-cloth. Do not use chemical detergent or rough sponge. It is recommended to clean the surface periodically for lucent surface.